Hardware Hookup - Crestron TPS-12 Operation Manual

®
Crestron Isys TPS-12G/15G-QM-L
Operations Guide – DOC. 6356
Diagnostics Menu
The Diagnostics button from the MAIN MENU contains controls for diagnostic
tools. The diagnostic tools should only be used under supervision from a Crestron
customer service representative during telephone support. The options available from
the DIAGNOSTICS MENU are numeric in nature and their interpretation is beyond
the scope of this manual.
DIAGNOSTICS MENU

Hardware Hookup

Refer to the following diagram and complete the video and communications
connections as needed in any order. Be sure to connect ground (G) and 24-volt
power prior to connecting other cables.
CAUTION: Do not apply excessive pressure to the touchscreen display during
handling. Doing so can crack the screen and damage the touchpanel.
NOTE: To prevent overheating, do not operate this product in an area that exceeds
the environmental temperature range listed in the table of specifications.
Consideration must be given if installed in a closed or multi-unit rack assembly since
the operating ambient temperature of the rack environment may be greater than the
room ambient. Contact with thermal insulating materials should be avoided on all
sides of the unit. Do not block fan vents.
NOTE: The maximum continuous current from equipment under any external load
conditions shall not exceed a current limit that is suitable for the minimum wire
gauge used in interconnecting cables. The ratings on the connecting unit's supply
input should be considered to prevent overloading the wiring.
NOTE: The headphone output includes WAV data, QM and Mic Input.
Wall Mount Touchpanels
Wall Mount Touchpanels: TPS-12G/15G-QM-L ¥ 31