GE LPS-O Instruction Manual page 248

11.7 ACTIONS
To reset any of the data, choose the Reset Data item in the Actions menu. A dialog box will appear with vari-
ous data items which can be reset. Check the associated check boxes, for all the data items which you want to
11
reset. Choose OK to proceed with resetting of selected items or choose Cancel to abort the reset operation.
While you choose OK if the Breaker Health Data item is checked, another dialog box appears asking you to
enter new breaker health values. If you choose OK, the LPSO-Link will send an appropriate message to the
device. If you choose Cancel then LPSO-Link will uncheck the Breaker Health Data item and brings you back
to the Reset Data dialog box.
When you choose this item from the Actions menu, a dialog box appears with the list of output types.
Select an output test from the list and choose OK to proceed or choose Cancel to quit. If you choose OK,
LPSO-Link will send an appropriate command to the device.
When you choose Relay Test item from the Actions menu, a dialog box with a list of available test modes will
appear. Select a test mode you want and choose OK to proceed with the test. Choose the Cancel button to
quit the testing.
Select the End Of Relay Test item from the list to bring the device out of the test mode. If you leave the device
in a test mode, during the logout from the device, LPSO-Link will remind you that you have left the device in the
test mode.
NOTE: The error message OTHER USER IS ACCESSING THIS RESOURCE will appear if the relay is in
test mode from another port, or the keypad.
Choose this menu item to open the breaker, this will prompt you with the confirmation message box. Click Yes
to open the breaker. The LPS-O will send command to the device to open the breaker.
Choose this menu item to close the breaker. This will prompt you with the confirmation message box. Click Yes
to close breaker. The LPS-O will send command to the device to close the Breaker.
11-
22
LPS-O Line Protection System
11 LPSO-LINK USER GUIDE
11.7.6 DIGITAL OUTPUT TEST
11.7.7 RELAY TEST
11.7.8 OPEN BREAKER
11.7.9 CLOSE BREAKER
GE Power Management