GE LPS-O Instruction Manual page 242

11.5 CONNECTING TO AND LOGGING OUT OF A DEVICE
11.5 CONNECTING TO AND LOGGING OUT OF A DEVICE
11
Once the host setup and device setup is completed, operations with the device may be performed. To start
with, a connection has to be established with a device to perform any kind of operation on that device. Select
the device you want to connect to from the user interface provided and LPSO-Link will provide the connection
for you, taking care of parameters like the phone number, speed of communication, etc.
To connect to a device, choose the Connect item in the Device menu.
A Connect Device dialog box appears. If there are more than one device configured in the LPSO-Link, the
Device Name field will appear with a scroll button. Click this button to get the list of configured devices. From
the list, select the device you desire a connection with and choose OK to proceed with the connection. Choose
the Cancel button to quit the connection process.
Once the connection is established with the device, you are requested to enter a password to the device. The
password determines the level of your privilege with the device. Enter password to the privilege at which you
wish to interact with the device. Choose the OK button to proceed with the password entered or choose the
Cancel button to quit the connection process.
The password you enter is sent to the device and if the login is successful, the menu bar and the tool bar
change to incorporate the additional functions. Reports, Settings and Actions items will be added to the
existing items in the menu bar.
Logging into the device is the start of a session. A session log starts and logs all the operations performed. The
current item in the log menu is enabled and can be used to view the current session log. The tool bar also
changes to display the Logout symbol in place of the connect symbol.
If the communication line is using a dial-up modem, the logout option will not hang-up the communication line.
To logout from a device, choose the Logout item from the Device menu. After a confirmation from the user, the
device will be logged out. From the tool bar, the Logout icon also can be used.
The following conditions will be checked before the request for logout confirmation.
• If any settings were downloaded, was an END message sent?
• Are the outputs in disabled condition?
• Is the device in Test mode?
If any of the above conditions are true, LPSO-Link will display an appropriate message in the confirmation box.
If you still want to proceed with the logout, choose the Yes button in the message box, or, if the END message
is not sent, choose No, get back to the settings, send the END message. There is no need to download the set-
tings again.
If the outputs are left in the disabled condition, choose the Enable Outputs item from the Actions menu.
If the device is in the Test mode, choose the End Test item from the Actions menu.
If you logout from a device when a dial-up modem is being used, a hang-up request need to be explicitly made.
In fact, you can directly ask for hang-up without logging out of a device. LPSO-Link will do the necessary logout
before hang-up.
11-
16
LPS-O Line Protection System
11 LPSO-LINK USER GUIDE
11.5.1 DESCRIPTION
11.5.2 CONNECT TO A DEVICE
11.5.3 LOGOUT FROM A DEVICE
GE Power Management