Table of Contents
Advertisement
10 ALPS-TEST PROGRAM
10.2 TEST CALCULATIONS
Figure 10–6: ENTER VALUE DIALOG BOX
Enter a valid new value and click on OK. The dialog box clears from the screen and the value in the test dialog
box is changed to the value just entered.
10.2.4 SELECTING A VALUE
Click on a Select button from one of the test dialog boxes (see Figure 10–5: INPUT TEST DIALOG BOX: M1
PHASE UNITS – ZONE 1 on page 10–4 for an example) for an input quantity that has a list of values. An Enter
Value dialog box appears.
Select a new value and click on Cancel. The dialog box clears from the screen and the value in the test dialog
box remains unchanged.
Select a new value and click on OK. The dialog box clears from the screen and the value in the test dialog box
is changed to the value just entered.
10.2.5 M1 PHASE UNITS – ZONE 1
The following dialog box is displayed for this test. The values are the default values used when the user selects
New Test File from the File menu.
10
Figure 10–7: M1 PHASE UNITS – ZONE 1 DIALOG BOX
GE Power Management
LPS-O Line Protection System
10-
5
Advertisement
Table of Contents
