10.1 INTRODUCTION
Start the program as in the previous section. When the program is started, the opening screen is displayed as
in Figure 10–1: ALPS-TEST INITIAL SCREEN on page 10–1.
•
The title bar of the main window has the currently opened file name which is the file name the user
selected
•
Pull down the File menu. The most recent file is this same file name.
10
10-
2
Figure 10–2: FILE AND EDIT MENUS
Note: Settings groups M1G, MTG, M3G, and M4G are
NOT applicable to the LPS-O relay. Ignore these set-
tings groups while performing tests.
Figure 10–3: ADDITIONAL ALPS-TEST MENUS
10.1.3 STARTING PROGRAM AFTER THE FIRST TIME
LPS-O Line Protection System
10 ALPS-TEST PROGRAM
GE Power Management