Table of Contents
Advertisement
11 LPSO-LINK USER GUIDE
Figure 11–13: PROTECTION CATEGORY SCROLL LIST
A hard copy of the settings can be obtained by choosing the Print button in the Settings dialog box.
While you are working on a set of settings uploaded from the device, if you wish to load the settings from a file
and use them for modifications and download, choose the Load button. A File Open dialog box appears for
you to choose the file.
NOTE: If more than one user is logged in to the relay, it may be possible to have more than one set of
settings group being edited locally. However, only one user may download and end settings
changes at a time.
You can view, modify and print settings loaded from a local file. It is not essential to connect to the device for
loading local settings. The file from which the settings are to be loaded is user selectable. A file open dialog
box helps in locating the necessary file.
The download and END options in the settings dialog box will be disabled in this option.
To load local settings when not connected to a device:
•
From the Device menu, choose the Local Settings item.
If you are already connected to a device,
•
From the Device menu, choose Settings.
•
From the drop down menu, choose Get Settings
•
Choose Load Local settings from the pop up menu.
GE Power Management
LPS-O Line Protection System
11.6 SETTINGS
11.6.3 LOAD LOCAL SETTINGS
11
11-
19
Advertisement
Table of Contents
