GE LPS-O Instruction Manual page 234

11.2 LPSO-LINK INSTALLATION
12. LPSO-Link Setup will now install the software and prompt for an appropriate directory for the Xpression
Builder software. It is highly recommended to install Xpression Builder now. Choose an appropriate direc-
11
tory and click Next.
13. The Installation Complete dialog box will appear. Check Yes, I want to view the ReadMe file to view the
latest software information and click Finish. The software is now installed.
Once the LPSO-Link software is installed, set-up must be chosen from the Device menu to set-up to communi-
cate to the relay.
NOTE: LPSO-Link may have difficulty operating with some Windows applications running; therefore, it
is recommended that before starting the application make sure there are no other programs or TSRs
loaded on the system as this might affect the performance of LPSO-Link and related applications.
b) INSTALLING FROM THE INTERNET
To install the software from the GE Power Management web site enter the following URL in your Web browser:
www.ge.com/indsys/pm
The home page is the same as the Products CD shown in Figure 11–2: GEPM PRODUCTS CD PRIMARY
SCREEN on page 11–5. Follow the above procedure from Step 3 to continue the installation.
11-
8
LPS-O Line Protection System
11 LPSO-LINK USER GUIDE
GE Power Management