10.2 TEST CALCULATIONS
The following dialog box is displayed for this test. The values are the default values used when the user selects
New Test File from the File menu.
The following dialog box is displayed for this test. The values are the default values used when the user selects
New Test File from the File menu.
The following dialog box is displayed for this test. The values are the default values used when the user selects
10
New Test File from the File menu.
10-
6
Figure 10–8: MT PHASE UNITS – ZONE 2 DIALOG BOX
Figure 10–9: M3 PHASE UNITS – ZONE 3 DIALOG BOX
LPS-O Line Protection System
10 ALPS-TEST PROGRAM
10.2.6 MT PHASE UNITS – ZONE 2
10.2.7 M3 PHASE UNITS – ZONE 3
10.2.8 M4 PHASE UNITS – ZONE 4
GE Power Management