Table of Contents
Advertisement
–
To change the units for specifying the paper size, select the desired setting
in the "Unit" group box.
5
Click the [OK] button in the lower-right corner of the Custom Size Settings di-
alog box.
The paper size settings in the Custom Size Settings dialog box are hidden.
6
Click the [OK] button in the Custom Size Settings dialog box.
The non-standard size is registered and can be selected from the list of paper
sizes.
Note
To change the width and length of a registered non-standard size, select the paper
size in the Custom Size Settings dialog box, click the [Edit] button, and then
change the settings. The name cannot be changed.
To delete a registered non-standard size, select the paper size in the Custom Size
Settings dialog box, and then click the [Delete] button.
A maximum of 20 characters can be entered for the registered name.
A maximum of 32 sizes can be registered.
4-15
Advertisement
Table of Contents
Troubleshooting
