Operation Precautions........................2-18 2.5.1 Power source ........................... 2-18 2.5.2 Operating environment ........................2-18 2.5.3 Storage of copies..........................2-18 2.5.4 Ozone release ..........................2-18 2.5.5 Direct sunlight ..........................2-18 2.5.6 Precaution for use of Folding Unit and Finisher................2-19 bizhub PRO C6000L contents-1...
Scan to FTP • Scan to SMB [User's Guide - Security] This guide describes the security functions. Please refer to this guide for how to use the Enhanced Security mode, and for detailed machine operation in Enhanced Security mode. bizhub PRO C6000L...
Page 7
Welcome User's guide CD manuals Overview [Trademarks/Copyrights] This guide describes trademarks, licenses, and copy- rights concerning this machine. Please be sure to read this guide before using the ma- chine. bizhub PRO C6000L...
To reduce paper consumption, use this function to copy a fixed number (2, 4, or 8) of original pages onto one sheet of paper. We recommend that you utilize the Auto Low Power, Auto Shut Off, Automatic Duplex Copying, and Combine functions. bizhub PRO C6000L...
This machine also provides the forgery prevention function in order to prevent financial instruments from be- ing copied illegally. We appreciate your understanding that printed images may infrequently have some noise or image data may not be stored under certain circumstances due to this forgery prevention function. bizhub PRO C6000L...
Page 10
Legal Restrictions on Copying MEMO bizhub PRO C6000L...
This symbol warns against cause burns. A diagonal line indicates a prohibited course of action. This symbol warns against dismantling the device. A solid circle indicates an imperative course of action. This symbol indicates you must unplug the device. bizhub PRO C6000L...
Contact your authorized service representative if an extension cord is re- quired. The outlet must be near the equipment and easily accessible. Otherwise you can not pull out the power plug when an emer- gency occurs. bizhub PRO C6000L...
It could drop or fall, causing personal injury or mechanical break- down. Do not let any object plug the ventilation holes of this prod- uct. Heat could accumulate inside the product, resulting in a fire or malfunction. bizhub PRO C6000L...
Licking any of these parts or in- gesting toner could damage your health. Do not store toner-related parts (developing units) near de- vices susceptible to magnetism, such as precision equip- ment and data storage devices. They could cause these products to malfunction. bizhub PRO C6000L...
A malfunction may occur as a result of a damaged or cut UBS cable. Do not diassembly this device, otherwise it may be damaged. Do not store the IC card within 40 mm of the card scanning area. bizhub PRO C6000L...
Regulation Notices Regulation Notices 2.2.1 GS Certification This product is GS-certified for the KONICA MINOLTA branded model C6000. 2.2.2 Laser Safety This product employs a Class 3B laser diode having maximum power of 15 mW and wavelength of 785-800 This product is certified as a Class 1 laser product. Since the laser beam is concealed by protective housings, the product does not emit hazardous laser radiation as long as the product is operated according to the in- structions in this manual.
Contains Mercury in the LCD control panel backlighting lamp, and/or in the scanning unit lamp. Dispose Ac- cording to Local, State or Federal Laws. Notification for California Customers This product uses a CR Lithium Battery which contains perchlorate material. bizhub PRO C6000L...
Page 19
This device must be used with a shielded network (10 Base-T/100 Base-TX) cable and a shielded parallel ca- ble. The use of non-shielded cables is likely to result in interference with radio communications and is pro- hibited under CISPR rules and local rules. bizhub PRO C6000L...
Caution Label on Fusing Part of Fixing Conveyance Unit 7 CAUTION DO NOT touch the fusing part of the fixing conveyance unit. Otherwise, you may get burned. Please be especially careful in withdrawing the fixing conveyance unit or opening the fusing part. 2-10 bizhub PRO C6000L...
Please do not try to work yourself, but contact your service representative. 2.3.3 Caution Label on Hinges of ADF 7 CAUTION DO NOT insert your fingers into the two ADF hinge portions. Otherwise, you may be injured. Please be careful when opening or closing the ADF. bizhub PRO C6000L 2-11...
Warning and Caution Labels 2.3.4 Caution Label on Toner Recovery Box 7 WARNING NEVER throw the toner recovery box into a fire. Otherwise, the toner may ignite and cause a dangerous situation. 2-12 bizhub PRO C6000L...
Failure to do so may cause unexpected injury, such as getting your fingers squeezed between the main body and the primary (main) tray going upward. Be sure to hold both front and rear sides of paper when removing printed sheets from the tray. bizhub PRO C6000L 2-13...
7 CAUTION DO NOT put your hand into the three holes on the tray bottom plate. Failure to do so may cause unexpected injury, such as getting your hand squeezed. Be especially care- ful when loading paper. 2-14 bizhub PRO C6000L...
FS-612 - PI-502 - Main body - DF-622 - LU-202 (Unit: mm) 1639 1478 1183 1041 250.5 2468.5 FS-612 - Main body - DF-622 - LU-202 (Unit: mm) 1639 1478 1183 1130 1041 250.5 2468.5 FS-531 - PI-502 - Main body - DF-622 - LU-202 bizhub PRO C6000L 2-15...
Page 26
FS-531 - PI-502 - Main body - DF-622 - MB-506 (Unit: mm) 1639 1478 1183 1041 1020 250.5 2010.5 FS-531 - PI-502 - Main body - DF-622 - MB-506 (Unit: mm) 1639 1478 1076 1041 1046 1561 OT-502 - Main body - OC-506 - MB-506 2-16 bizhub PRO C6000L...
Page 27
Installation Space (Unit: mm) 1639 1478 1041 2143 Main body - MB-504 (Unit: mm) 1639 1478 1041 2143 Main body - MB-504 - LU-202 bizhub PRO C6000L 2-17...
2.5.5 Direct sunlight Do not install the machine and its options in a place exposed to direct sunlight, otherwise the machine per- formance may be degraded or any trouble may be caused. 2-18 bizhub PRO C6000L...
The primary (main) tray of Finisher FS-531 or of Finisher FS-612 gradually goes down while printed mate- rials output. DO NOT allow any object to interfere with the operation of the tray on the left side of the staple finisher, as any interference may cause damage to the staple finisher. bizhub PRO C6000L 2-19...
Page 30
Operation Precautions MEMO 2-20 bizhub PRO C6000L...
Page 31
Operation Precautions MEMO bizhub PRO C6000L 2-21...
Page 32
Operation Precautions MEMO 2-22 bizhub PRO C6000L...
Page 33
Operation Precautions MEMO bizhub PRO C6000L 2-23...
Page 34
Operation Precautions MEMO 2-24 bizhub PRO C6000L...