Netware Server/Client (Except Ndps); Netware Server/Client (Ndps) - Konica Minolta PCL-400 User Manual

NetWare server/client (except NDPS)

1
Connect the network cable. (Refer to "Connecting to a local area network
(LAN)" on page 1-12.)
2
Specify the necessary settings for connecting this machine to a NetWare server.
(Refer to "Connecting the computer and this machine over a network" on
page 3-15.)
3
Specify the necessary settings for printing through a NetWare server from a
NetWare client. (Refer to "Connecting the computer and this machine over a
network" on page 3-15.)

NetWare server/client (NDPS)

1
Connect the network cable. (Refer to "Connecting to a local area network
(LAN)" on page 1-12.)
2
From the machine's control panel, specify the IP address, subnet mask and de-
fault gateway. (Refer to "Specifying an IP address" on page 3-9.)
3
Print the settings information, and then check the settings. (Refer to "Printing
the settings information" on page 3-13.)
4
Specify the necessary settings for connecting this machine to a NetWare server.
(Refer to "Connecting the computer and this machine over a network" on
page 3-15.)
5
Specify the necessary settings for printing through a NetWare server from a
NetWare client. (Refer to "Connecting the computer and this machine over a
network" on page 3-15.)
3-8