Port9100 Printing - Konica Minolta PCL-400 User Manual

10
Click the [Next] button.
11
Click the [Finish] button.
12
Click the [Close] button.
13
Click the [Close] or [Apply] button.

PORT9100 printing

Compatible operating systems: Windows 2000/Windows XP/Windows Server 2003/
Windows Vista
Reminder
Before specifying settings, check that the following preparations have been com-
pleted.
The computer can communicate using the TCP/IP protocol.
This machine can communicate using the TCP/IP protocol.
The printer driver is installed on the computer.
(For details on installing the PCL driver, refer to "Installing the printer driver
by using the AutoRun Installation" on page 2-15. If the GDI driver is to be in-
stalled, refer to the User's Guide for the GDI printer controller, included with
this machine.)
1
For Windows 2000: On the Start menu, point to "Settings", and then click
"Printers" to open the Printers folder.
For Windows XP/Server 2003: On the Start menu, click "Control Panel", then
"Printers and Other Hardware", and then click "View installed printers or fax
printers" to open the Printers and Faxes folder.
For Windows Vista: On the Start menu, click "Control Panel", then "Hardware
and Sound", and then click "Printers" to open the Printers folder.
2
Right-click the printer icon.
3
Click "Properties" to open the Properties dialog box.
4
Click the Ports tab, and then click the [Add Port] button.
5
In the Printer Ports dialog box, select "Standard TCP/IP Port", and then click
the [New Port] button.
6
After the Add Standard TCP/IP Printer Port Wizard starts up, click the [Next]
button.
3-17