Table of Contents
Advertisement
–
For information on documents that can be used and the scanning area of the
image, refer to the User's Guide included with the machine.
3
Press the [Speed Dial] key, and then use the keypad to type in the 3-digit speed
dial number (number programmed with the address of the FTP server where the
data is to be uploaded).
–
When the destination address is entered, "OTHER SETTING=," appears.
To change the transmission settings, such as the subject, cc address or file
format, press the [,] key. The "SCAN OTHER SETTING" menu appears.
For details on changing the transmission settings, refer to "Changing the
transmission settings" on page 9-10.
–
Specify a speed dial number between 241 and 250.
–
If nothing is registered with the specified speed dial number, an error mes-
sage appears. Enter the correct speed dial number.
–
If the number was incorrectly entered, press the [Back] key, and then type
it in correctly.
4
Press the [OK] key.
The destination appears.
10-6
Advertisement
Table of Contents
Troubleshooting
