Konica Minolta PC-408 Installation Manual

PC-408
INSTALLATION MANUAL
Applied Machines: C360/C280/C220
COLOR MFP: 36 ppm/28 ppm/22 ppm
Product Code: A0ED
Note:
Lifting the machine in an awkward position or
transporting it in a poorly balanced position could
result in personal injury. When transporting the
machine, assign an adequate number of persons
to the job and ensure that each person can take a
good position of not being excessively loaded
(mass: approx. 30.5 kg (67 lb)).
I. Accessory parts
No. Name Shape
1. Fixing leg A
4348U020MA
2. Fixing leg B
4348U020MB
3. Fixing leg
cover A
4348U099MA
4. Fixing leg
cover B
4348U099MB
5. Fixing
bracket A
4658U021AA
6. Fixing
bracket B
A093IXC004DA
7. Screw A
(black)
(4 × 8 mm)
4038IXC033DA
Paper Feed Cabinet
No. Name Shape
8. Screw B
(4 × 8 mm)
4038IXC033DA
9. Screw C
(4 × 10 mm)
4038IXC033MA
10. Installation
manual
Q'ty
4980IXC019MA
3
After unpacking, be sure to get rid of the
packaging materials and keep them out of
the reach of children.
1
Putting the head in the plastic bag
involves danger of suffocation.
Note:
This manual provides the illustrations of the acces-
sory parts and machine that may be slightly differ-
3
ent in shape from yours. In that case, instead of
the illustrations, use the appearance of your
machine to follow the installation procedure. This
does not cause any significant change or problem
with the procedure.
1
Note:
When removing the paper feed cabinet from its
shipping carton, do not hold the reinforcement
bracket (as a personal injury or a deformed frame
could result).
3
Reinforcement bracket
1
5
II. Installation procedures
1. Turn off the machine.
2. Remove the cord clamp and unplug the power
cord from the machine (one screw).
Q'ty
12
4
3. Remove the protective tape from the paper feed
cabinet.
1
Note:
set
Do not peel the tape that fixes the paper feed cab-
inet hookup harness in position until the machine
is attached to the paper feed cabinet.
A093IXC027DA
A0XW-9552-01
E-1
4. Insert the proper tool such as a screwdriver to the
hole on the back of the paper feed cabinet to take
out the drawer.
A0XWMXC031MA 5. Remove the shipping preservatives and protec-
tive tape from the inside of the drawer.
Hookup
6. Slide the drawer back in.
harness
7. Pull out the handles.
A0XWMXC036MB
A0XWMXC037MA
A0XWMXC038MB
A0XWMXC039MA
A0XWMXC101MB