Table of Contents
Advertisement
Restore Factory Defaults
The network interface card and image controller can be initialized.
1
Click the [Restore] button beside either "Printer Controller" or "NIC".
2
When the confirmation message appears, click the [Yes] button.
To stop initializing, click the [No] button.
Reminder
Jobs being processed are not saved when the initialize operation is performed.
Be careful since the current Easy Web Management settings will be lost.
Initializing the printer controller is possible only if the image controller PCL-
4000 is installed.
System tab — Maintenance — Counter
Counters managed by the machine can be displayed.
Note
The information that is displayed differs depending on the installed options and
the specified settings.
11-38
Advertisement
Table of Contents
Troubleshooting
