Table of Contents
Advertisement
IPP printing
1
Connect the network cable. (Refer to "Connecting to a local area network
(LAN)" on page 1-12.)
2
From the machine's control panel, specify the IP address, subnet mask and de-
fault gateway. (Refer to "Specifying an IP address" on page 3-9.)
3
Print the settings information, and then check the settings. (Refer to "Printing
the settings information" on page 3-13.)
4
Install the printer driver. Specify the network port when the driver is installed.
–
For details on specifying the network port, refer to "Connecting the com-
puter and this machine over a network" on page 3-15.
–
For details on installing the PCL driver, refer to "Installing the printer driv-
er by using the AutoRun Installation" on page 2-15.
–
If the GDI driver is to be installed, refer to the User's Guide for the GDI
printer controller, included with this machine.
3-7
Advertisement
Table of Contents
Troubleshooting
