If The Memory Becomes Full While Scanning Documents - Konica Minolta PCL-400 User Manual

9.6

If the memory becomes full while scanning documents

If the memory becomes nearly full while documents are being scanned, a warning
message appears. Select whether to continue the transmission or to cancel it.
After a message appears warning that the memory is nearly full, the "MEM. FULL/
TX CANCEL" menu appears.
Press the [,] or [+] key until "YES" or "NO" is selected, and then press the
%
[OK] key.
– If "YES" is selected and the [OK] key is pressed, the message "ACCEPT-
ED" appears, and then the Scan mode screen appears again.
– If "NO" is selected and the [OK] key is pressed, the message "*WAIT
MEMORY SPACE*" appears, and transmission of the scanned page be-
gins. After the transmission is finished, the scanning of the remaining pag-
es begins automatically.
– If the memory became full while scanning a document from the original
glass, select "NO" when the warning message appears, and then press the
[OK] key to begin sending the scanned pages. When the transmission is
finished, the message "COMPLETE" appears, and then the Scan mode
screen appears again.
9-31