Table of Contents
Advertisement
When "E-Mail" or "LDAP Search" is selected:
Item
Description
Destination Name
Type in the name of the recipient. The display name appears in the control panel
display.
Destination Address
Type in the e-mail address of the recipient. (maximum 64 characters)
If "LDAP Search" was selected, this information is already entered.
Basic Mode/Ad-
Select the e-mail mode (basic mode or advanced mode) to be used for sending doc-
vanced Mode
uments as Internet faxes.
Max TX Size
Specify the maximum size for transmissions with advanced mode.
Max Resolution
Specify the maximum resolution for transmissions with advanced mode.
Coding Mode
Specify the maximum compression encoding method for scan data to be sent with
advanced mode.
Note
Settings for Internet faxing are applied when a transmission is specified using the
procedure for Internet fax transmissions. The settings are not applied when a
transmission is specified using the procedure for Scan to E-mail transmissions.
For details on Internet faxing, refer to the User's Guide for fax kit FAX-4000.
When "Group Dial" is selected:
Group dial settings are specified using the same procedure as when "Group Dial Set-
ting" on the Scan tab is clicked. For details, refer to "Scan tab — Group Dial Setting"
on page 11-28.
11-51
Advertisement
Table of Contents
Troubleshooting
