Table of Contents
Advertisement
When "AUTO DETECTION" is selected
1
If "AUTO DETECTION" was selected in step 5 and the [OK] key is pressed,
the following screen appears.
2
Press the [OK] key.
The message "SCANNING" appears, and the following screen appears when
scanning is finished.
–
When scanning a document that contains multiple pages, position the next
page of the document on the original glass, and then press the [OK] key.
Repeat this step until all pages of the document are scanned.
3
After all pages of the document are scanned, press the [Start] key.
When transmission is finished, the message "COMPLETE" appears and the
Scan mode screen appears again.
Note
To stop scanning, press the [Clear/Stop] key.
If the transmission could not be completed correctly, a transmission result report
is printed.
To cancel a queued transmission of scan data, press the [Function] key, and then
select "CANCEL RESERV.". For details, refer to the User's Guide for fax kit
FAX-4000.
9-7
Advertisement
Table of Contents
Troubleshooting
