Nortel CallPilot Installation And Configuration Manual page 76

Installing the server, cables, and peripheral devices
5 Plug the other end of the power cord into the modem's power adapter
connector.
Result: The back of the modem appears as follows:
RJ-11
connection
6 Power up the modem.
Note: Ensure that the modem is receiving power by checking that at least
one LED on its front panel is lit.
7 Place the modem in an area where it cannot be accidentally damaged or
where people cannot trip over attached cords.
8 Continue with
76
Ensure DIP switch
4 is ON
"Completing the installation" on page
I/O breakout
panel COM1
connection
connection
77.
Standard 1.0
Power
CallPilot