Nortel CallPilot Installation And Configuration Manual page 29

May 2000
Faceplate
The faceplate of the 200i server provides features and connectors for external
peripherals.
The following picture of the server faceplate shows interface connections and
features.
Lock latch
Reset button
Type III PCMCIA slot
(PC card Type I, II, or III)
Two MPC slots
(for MPC cards only)
MPC LEDs
LED hex display
(four characters)
RS-232 maintenance port
Lock latch
A description of each faceplate feature follows:
Faceplate feature
Lock latches
VGA connector
Part 2: 200i Server Hardware Installation
Description
Lock latches secure the server to the IPE shelf.
The VGA connector is a standard, high-density
15-pin D-type female connector coming from the
daughterboard.
About the 200i server
VGA connector
Status LED
Ejector button
Keyboard connector
Mouse connector
Ejector buttons
SCSI connector
Product label and
release identification
29