Required Tools And Additional Materials - Nortel CallPilot Installation And Configuration Manual

May 2000

Required tools and additional materials

Use this checklist for the tools and materials you might need to perform
installation and maintenance tasks.
Check
Part 2: 200i Server Hardware Installation
Description
Phillips cross-head screwdriver
Standard slot-head screwdriver (1/4" and 1/2")
Set of hex nut drivers
Sidecutters
Jumper removal tool
Tape measure for determining cable lengths
Tweezers
Antistatic ESD wrist strap (recommended)
Pen or pencil for writing notes, cable lengths, and cable
identifications
Flashlight for examining interior of chassis
Cable tie wraps
Pen or pencil for noting cable lengths and labeling cables
Cable identification labels
Equipment log. This is used to record the model and serial
number of the system, all installed options, and other
information.
Null modem serial cable (it can be useful for troubleshooting)
Before you begin
15