General Safety - Nortel CallPilot Installation And Configuration Manual

Safe handling of CallPilot components

General safety

Introduction
If you need to replace or upgrade any system parts, follow Nortel Networks
safety guidelines to prevent personal injury and damage to the server or
replacement parts
.
Nortel Networks recommends the following safety guidelines for performing
installation and maintenance procedures:


Plug peripheral devices into properly grounded power sources to prevent
electric shock.


Use a surge protector or uninterruptible power supply to protect your
system from sudden increases and decreases in electrical power.


Ensure that nothing rests on peripheral cables, and that cables will not be
tripped over or stepped on.


Do not push foreign objects into any server opening.


Protect the server from electrostatic discharge by wearing an antistatic wrist
strap attached to any unpainted metal surface on the switch when handling
components.
Cooling and airflow
For proper cooling and airflow, always install the chassis top cover before
turning on the system. You risk damaging system parts if you operate the system
without the cover in place.
20
.
WARNING
Risk of personal injury and equipment damage
Field maintenance must always be performed by fully qualified,
trained personnel.
Standard 1.0
CallPilot