About the 200i server
Overview
Introduction
The 200i server is a flexible, multimedia telephony server designed to integrate
with Nortel Networks PBX products. You install the server on Intelligent
Peripheral Equipment (IPE) shelves at the resident switch.
Integration with the switch
The 200i server occupies two slots of an IPE shelf. When the server is installed
in the IPE shelf, its connector mates with the backplane of the switch, which
provides power and communications links.
Server power
The server powers up automatically when it is locked into position on the IPE
shelf. Powering up the server does not affect switch operation.
Maintenance and diagnostics
Server maintenance and diagnostics are performed remotely through the
administration PC.
What this chapter contains
This chapter describes the following 200i server components:
200i server motherboard, daughterboard, and faceplate
environmental specifications
I/O breakout panel
supported peripheral devices
26
Standard 1.0
CallPilot