Using Safety Instructions; Safety Instructions - Structure; Explaining Signal Words And Safety Alert Symbol - Bosch Rexroth VAM 10.2 Project Planning Manual

DOK-SUPPL*-VAM*XX.2***-PR03-EN-P
Rexroth IndraControl VAM 10.2/40.2 Machine Control Panels
2

Using safety instructions

2.1 Safety instructions – Structure
2.2

Explaining signal words and safety alert symbol

The safety instructions are structured as follows:
Safety alert symbol
Signal word
CAUTION
Do not open the batteries and do not heat them over 80 °C.
Fig. 2-1: Safety instructions – structure
The safety instructions in this documentation contain specific signal words
(danger, warning, caution, notice) and, if necessary, a safety alert symbol
(according to ANSI Z535.6-2006).
The signal word is used to draw attention to the safety instruction and also
provides information on the severity of the hazard.
The safety alert symbol (a triangle with an exclamation point), which pre‐
cedes the signal words danger,warning and caution is used to alert the read‐
er to personal injury hazards.
DANGER
In the event of non-compliance with this safety instruction, death or serious
injury will occur.
WARNING
In the event of non-compliance with this safety instruction, death or serious
injury will occur.
CAUTION
In the event of non-compliance with this safety instruction, minor or moderate
injury can occur.
NOTICE
In the event of non-compliance with this safety instruction, material damage
can occur.
Bosch Rexroth AG
Using safety instructions
Consequences and
source of danger
Burns and chemical burns due to wrong
battery treatment!
Avoiding danger
7/69