Key Switch; E-Stop - Bosch Rexroth VAM 10.2 Project Planning Manual

16/69 Bosch Rexroth AG
Technical data
5.2

Key switch

5.3

E-STOP

Rexroth IndraControl VAM 10.2/40.2 Machine Control Panels
Manufacturer
Manufacturer name
Withdrawal
Rotation angle
Others
Tab. 5-4: General data, key switch
Electrical data
Switching voltage AC/DC
Switching current AC/DC
Mechanical data
Torque while actuating
Torque against fixed stop
Mechanical design
Connections
Fastening
Contact configuration
Contact function
Contact system
Contact materials
Service life
Tab. 5-5: Technical data, key switch
For further information, please refer to the data sheet of the manufacturer.
Manufacturer
Manufacturer name
Connection cross section
DOK-SUPPL*-VAM*XX.2***-PR03-EN-P
Company RAFI
1.10.119.967/0000 for VAM 10.2-NA-... /
VAM 40.2-NA-...
1.10.119.617/0000 for VAM 10.2-NB-...
VAM 10.2-NA-... / VAM 40.2-NA-...: Can be with‐
drawn in any position
VAM 10.2-NB-...: Withdrawal only in position "0"
3 x 90°
4-stages, 1-pin
5 V min.
42 V max.
5 mA min.
100 mA max.
0.035 Nm
1.8 Nm
Soldering connection, tinned
Threaded ring
One N/O contact per switch position
Engaged
Sliding contact, auto-cleaning
Au alloy
50000
Télémecanique (Schneider Electric)
E-STOP button, circumvention-proof, rotary re‐
lease: BS844
Standard auxiliary switch, N/C contact (with
forced opening): ZBE-102
Fastening flange: BZ009
Minimum without wire end sleeve (1 x 0.22 mm
Maximum without wire end sleeve (2 x 1.5 mm
2 )
2 )