System Presentation; Brief Description; Standard Variantsvam 10.2/Vam 40.2; Overview On Standard Variants - Bosch Rexroth VAM 10.2 Project Planning Manual

DOK-SUPPL*-VAM*XX.2***-PR03-EN-P
Rexroth IndraControl VAM 10.2/40.2 Machine Control Panels
4

System presentation

4.1

Brief description

4.2

Standard variantsVAM 10.2/VAM 40.2

4.2.1

Overview on standard variants

4.2.2

Rear side

Machine control panels supplement operator and visualization terminals.
They are used for the operation mode selection and the manual machine op‐
eration. Thus, the machine control panels contain operating elements, e. g.,
keys with LED displays, rotary switches for feed and spindle override, E-
STOP button, key switch with authorization system and machine button.
The Maschinenbedienfelder VAM 10.2/VAM 40.2 were designed for being
used with the devices of the VPB, VPP, Vxx product family and are adapted
to the design of these devices. The VAM 10.2 width corresponds to the VPP
16 panel PC width. The VAM 40.2 width corresponds to the VPP 40 panel PC
width.
VAM devices are Maschinenbedienfelder for CNC machines with Profibus
connection.
The VAM 10.2/VAM 40.2 machine control panels are available in different
standard variants:
Keypad with keys
and LED that can be
labeled and program‐
med freely
VAM 10.2 2 keypads, each with
15 keys
VAM 40.2 2 keypads, each with
15 keys
Tab. 4-1: VAM 10.2/VAM 40.2 standard variants
The following components are located on the rear side of the VAM 10.2/
VAM 40.2 devices:
● 25-pin connector to connect a handwheel device
● 6-pin connector to connect a handwheel
● 16 digital 24 V inputs
● 8 digital 24 V outputs
Bosch Rexroth AG
System presentation
Further elements Ordering numbers
and type codes
● E-STOP button R911170770
● Priority switch VAM10.2-PB-NA-
TA-TA-VB-1608-NN
● 2 override rotary
switches for feed
and spindle
● Quick stop module
with two machine
buttons
● E-STOP button R911170772
● Priority switch VAM40.2-PB-NA-
TA-TA-VB-
● 2 override rotary
MA-1608-NN
switches for feed
and spindle
11/69