Handwheel Module - Bosch Rexroth VAM 10.2 Project Planning Manual

34/69 Bosch Rexroth AG
Module design
7.2.6

Handwheel module

Rexroth IndraControl VAM 10.2/40.2 Machine Control Panels
Fig. 7-7: Quick stop module
The quick stop module is provided with a illuminated white machine button
and an unlit red machine button. Both buttons can be labeled application-
specifically with a labeling strip.
The illuminated white machine button features an N/C contact (contact
names 1 and 2), an N/O contact (contact name 3 and 4) and a 24 V LED
(contact names X1 and X2).
The unlit red machine button features an N/C contact (contact names 1 and
2) and an N/O contact (contact names 3 and 4).
A handwheel module is only available on the VAM 40.2 machine
control panel. The VAM 10.2 is also provided with the handwheel
interface.
The VAM 40.2 can be ordered as customized variant with a handwheel mod‐
ule (R911170968 VAM40.2-PB-NA-TA-TA-VB-HA-1608-NN).
DOK-SUPPL*-VAM*XX.2***-PR03-EN-P