Compatibility Test - Bosch Rexroth VAM 10.2 Project Planning Manual

DOK-SUPPL*-VAM*XX.2***-PR03-EN-P
Rexroth IndraControl VAM 10.2/40.2 Machine Control Panels
5.8

Compatibility Test

NOTICE
The UL- and CSA- marking is only valid for the device in its delivery status.
After having modified the device the UL and CSA compliance must be veri‐
fied.
All Rexroth controls and drives are developed and tested according to the lat‐
est state-of-the-art of technology.
As it is not possible to follow the continuing development of all materials (e. g.
lubricants in machine tools) which may interact with our controls and drives, it
cannot be completely ruled out that any reactions with the materials used by
Bosch Rexroth might occur.
For this reason, before using the respective material a compatibility test has
to be carried out for new materials (e. g. lubricants and cleaning agents) and
our housing or our housing materials.
Bosch Rexroth AG
Loss of UL and CSA compliance due to
changes on the device.
21/69
Technical data