System Presentation; Brief Description - Bosch Rexroth VAM 10.1 Project Planning Manual

VAM 10.1 / VAM 40.1
1

System Presentation

1.1

Brief Description

1.2 Machine Operator Panel VAM 10.1
DOK-SUPPL*-VAM*10/40**-PR02-EN-P
Machine operator panels complete machine operator terminals and are
used to select the operating modes as well as to operate the machine
manually. Thus, they contain the necessary operating elements, e. g.,
keys with LED displays, rotary switches for feed and spindle override, E-
STOP pushbuttons, key switches and machine pushbuttons.
The machine operator panels VAM 10.1 and VAM 40.1 have been
specially designed for the use in combination with the operator terminals
BTV 16 and BTV 40 and are adapted to the design of the operator
terminals. Thereby, the width of the VAM 10.1 corresponds to the width of
the BTV 16 and the width of the VAM 40.1 is equal to the width of the
BTV 40.
VAM-type devices are machine operator panels for CNC machines with
PROFIBUS connection.
The VAM 10.1 is the compact variant of the VAM-Type devices. The
machine operator panel VAM 10.1 is equipped with an E-STOP
pushbutton, a 4-stage key switch, two keypads each including 15 keys,
that might be labeled and programmed according to the system
requirements, and with two override rotary switches for feed and spindle.
Additionally, on the rear side the following components are available:
• 25-pin connector to connect a hand-held terminal
• 6-pin connector to connect a handwheel
• 16 digital 24 V inputs
• 8 digital 24 V outputs
Fig. 1-1: Front view VAM 10.1
1-1
System Presentation
VAM_10.FH9