Ricoh Pro C5200 Series Manual page 97

CIP Training Pro C5200 series
Adjustment Settings for Operators
No.
037 [Ppr Trns CV: Start Timing:
BW: Side 1]
038 [Ppr Trns CV: Start Timing:
BW: Side 2]
041 [Ppr Trns CV: Start Timing:
FC: Side 1]
042 [Ppr Trns CV: Start Timing:
FC: Side 2]
039 [Ppr Trns CV: Duration:
BW: Side 1]
040 [Ppr Trns CV: Duration:
BW: Side 2]
043 [Ppr Trns CV: Duration: FC:
Side 1]
044 [Ppr Trns CV: Duration: FC:
Side 2]
045 [Ppr Trns Contact Mode]
046 [Ppr Trns Gap: On Timing]
047 [Ppr Trns Gap: Off Timing]
032
Item
Adjust the timing to start the constant voltage control for
the bias during paper transfer when printing in each print
Adjust the duration of the constant voltage control for the
bias during paper transfer when printing in each print
Specify whether or not to enable the paper transfer
contact/separation mode.
Adjust the timing for the intermediate transfer belt and the
paper transfer unit to come into contact during paper
contact/ separation.
Adjust the timing for the intermediate transfer belt and the
paper transfer unit to separate during paper contact/
separation.
Description