Ricoh Pro C5200 Series Manual page 109

CIP Training Pro C5200 series
Adjustment Settings for Operators
Setting Items
[Second Paper Motor Feed Speed]
069: [Third Paper Motor Feed Speed]
Adjust the third paper feed motor's speed.
Setting Items
[Third Paper Motor Feed Speed]
071: [Bypass Tray Motor Feed Speed]
Adjust the bypass tray paper feed motor's speed.
Setting Items
[Bypass Tray Motor Feed Speed]
072: [Registration Motor Feed Speed]
Adjust the registration motor's speed.
The registration motor drives the registration roller that feeds paper to the paper transfer unit.
Use this to resolve image quality problems (such as image scaling errors or jitter
If you change this setting, apply the same values to the following settings:
• 073: [First Transport Motor Feed Speed]
• 074: [Second Transport Motor Feed Speed]
• 075: [Third Transport Motor Feed Speed]
• 077: [Relay Transport Motor Feed Speed: CW]
• 078: [Relay Transport Motor Feed Speed: CCW]
• 093: [2 Sided Exit Motor Speed]
Max. Value Min. Value
3.0
Max. Value Min. Value
3.0
Max. Value Min. Value
3.0
Step Unit
0.1 %
Step Unit
0.1 %
Step Unit
0.1 %
*1
).