Ricoh Pro C5200 Series Manual page 40

CIP Training Pro C5200 series
Adjustment Settings for Operators
• This setting is not effective for paper fed from paper trays with custom paper presets. For such
paper, the value specified in [Pickup Assist Setting] in [Advanced Settings] takes precedence.
[Finishing: Finisher]
0401: [Punch Position: With Feed]
Adjust the horizontal position of the punch holes when using Finisher SR4120 or Finisher SR4130.
move it toward the bottom edge (right).
2 Holes Left
Setting Items
[2 Holes Type JP / EU]
[3 Holes Type US]
[4 Holes Type EU]
[4 Holes Type NE]
[2 Holes Type US]
[1 Hole Type JP]
0402: [Punch Position: Across Feed]
Adjust the vertical position of the punch holes when using Finisher SR4120 or Finisher SR4130.
2 Holes Top
Paper feed direction
Default
0.0
CDS026
Max.
Value Value
2.0
Min.
Step
Value
0.4
Unit
mm