Ricoh Pro C5200 Series Manual page 131

CIP Training Pro C5200 series
Adjustment Settings for Operators
101: [Initial CPM Setting: Low Temp]
Select one of the three levels of copy/print speed reduction at low temperatures.
If the temperature of the fusing unit fall below a certain point, the machine will reduce the copy/print
speed to increase fusibility. You can select from the three levels of copy/print speed reduction.
Pro C5200S
• [Do not Reduce]
65 cpm (full speed)
• [Reduce Level 1]
52 cpm (80% of full speed)
• [Reduce Level 2]
42 cpm (65% of full speed)
• [Reduce Level 3]
32 cpm (50% of full speed)
Pro C5210S
• [Do not Reduce]
80 cpm (full speed)
• [Reduce Level 1]
64 cpm (80% of full speed)
• [Reduce Level 2]
52 cpm (65% of full speed)
• [Reduce Level 3]
40 cpm (50% of full speed)
• The setting will take effect if the ambient temperature is 17°C (62.6°F) or lower. Since the
temperature of the fusing unit may decrease in a cold environment, specify this setting in addition to
"49: Reduce Initl CPM: Norml/High Temp Env".
[Initial CPM Setting: Low Temp]
Setting Items Values
[Do not Reduce]
[Reduce Level 1]
[Reduce Level 2]
[Reduce Level 3]