Ricoh Pro C5200 Series Manual page 18

CIP Training Pro C5200 series
Adjustment Settings for Operators
No.
0805 [Paper Alignment for
Stapling: With Feed]
0806 [Number of Sheet Align for
Stapling]
0807 [Punch Position: Across
Feed]
0808 [Punch Position: With Feed] Adjust the horizontal position of the punch holes when
0809 [Correct Punch Skew]
0810 [Punch Skew Correction]
0811 [Paper Alignment in Shift
Tray Setting]
0812 [Paper Alignment in Shift
Tray: Across Feed]
0813 [Output Tray Descending
Position]
0814 [Exit Guide Close Timing:
Booklet Fin]
0815 [Output Trail Edge Press
Setting]
0816 [Output Fan Setting]
Item
Adjust the travel distance of the paper edge stopper for
edge stapling when using Finisher SR5070 or Booklet
Finisher SR5080.
Specify the number of sheets the staple unit aligns at a
time for stapling.
Adjust the vertical position of the punch holes when using
Finisher SR5070 or Booklet Finisher SR5080.
using Finisher SR5070 or Booklet Finisher SR5080.
Specify whether or not to enable punch skew correction
when using Finisher SR5070 or Booklet Finisher
SR5080.
Adjust the amount of skew correction for punching when
using Finisher SR5070 or Booklet Finisher SR5080.
Specify the accuracy of printed paper alignment when
Finisher SR5080.
Adjust the width of the paper alignment jogger in the shift
tray when using Finisher SR5070 or Booklet Finisher
SR5080.
Specify the descending position for the finisher shift tray
when paper is delivered to it using Finisher SR5070 or
Booklet Finisher SR5080.
Specify when to close the exit guide after paper is
delivered to the finisher shift tray of Finisher SR5070 or
Booklet Finisher SR5080.
Specify whether or not to press down the trailing edge of
the paper when it is delivered to the finisher shift tray of
Finisher SR5070 or Booklet Finisher SR5080.
Specify how the shift tray fan moves when using Finisher
SR5070 or Booklet Finisher SR5080.
Description