Ricoh Pro C5200 Series Manual page 29

CIP Training Pro C5200 series
Adjustment Settings for Operators
In "Temperature on Standby Mode", you can specify the fusing temperature in standby mode*.
In "Temperature Before Performing a Process", you can specify the fusing temperature applied when the
machine is accessed from the control panel or when the machine is receiving print jobs.
Setting Items
[Temperature on Standby Mode]
[Temperature Before Performing a
Process]
* In standby mode, unlike energy saver mode, the machine is ready for immediate operation.
• Depending on the machine's other settings, changing this setting might increase the waiting time
before a process is performed.
0208: [Auto Color Selection Setting]
increasing the number of sheets printed prior to switching.
job with the first ten pages in color and the rest in black and white.
Setting Items
[Switch to B&W Printing]
0209: [Photoconductor Special Mode]
Increase the amount of lubricant applied to the drum unit.
If you continuously print images that consume a lot of toner, white spots may appear because of a lack
of lubricant. If this happens, you can prevent the spots by selecting [Special Mode].
Default Max.
Value Value
120 200
120 180
Default Max.
Value Value
5 10
Min.
Step
Value
0 1
120 1
Min.
Step
Value
1 1
Unit
degree(s)
degree(s)
Unit
sheet(s)