CIP Training Pro C5200 series
Adjustment Settings for Operators
[Buffer Pass Unit Fan Activation Setting]
[Machine: Maintenance]
0301: [Execute Cleaning Initial Setting]
Initialize the cleaning unit for the PCU.
Perform this after replacing the drum unit or cleaning unit for the PCU. For details about replacing units,
see the Replacement Guide.
This operation takes one or two minutes. During this operation, a message appears on the control panel.
Do not pull out the drawer while the message is being displayed.
[All Colors]
[Cyan, Magenta, Yellow]
[Black]
[Cyan]
[Magenta]
[Yellow]
• Perform this only once every time you replace a unit. Do not perform it repeatedly.
0302: [Execute Process Initial Setting]
Initialize print settings at once.
Setting Items
Setting Items
Values
[All Paper Weights]
[Weight 3 & Above]
[Weight 4 & Above]
[Weight 5 & Above]
[Weight 6 & Above]
[Off]
Values
Press [OK].
Default Value
[Weight 4 & Above]