Ricoh Pro C5200 Series Manual page 102

CIP Training Pro C5200 series
Adjustment Settings for Operators
Paper Delivery Adjustment
065: [Paper Weight Detection]
Specify whether or not to detect the paper weight.
If set to [On], a message appears on the control panel when the paper weight sensor detects paper of a
weight other than that specified in [Tray Paper Settings].
Thin, heavy paper (such as coated paper) may cause the paper weight to be misdetected. When using
such paper, set this to [Off] to prevent misdetection.
[Paper Weight Detection]
079: [Double Feed Detection]
Specify whether or not to detect double feeding of paper.
If this is set to [On], the machine stops when it detects paper double feeding, so as to prevent mixing of
unprinted paper.
release paper). In such a case, set this to [Off].
[Double Feed Detection]
Image Position/Scaling Adjustment
001: [Image Position: Across Feed: Side 1]
Adjust the vertical position of the image to be printed on Side 1 of the paper.
Press [+] to shift the image to the top.
Setting Items
Setting Items
Values
[On]
[Off]
Values
[On]
[Off]