Ricoh Pro C5200 Series Manual page 110

CIP Training Pro C5200 series
Adjustment Settings for Operators
Setting Items
[Registration Motor Feed Speed]
*1 The jitter occurs when the leading or trailing edge of paper that passes through the paper transfer unit is
transmitted to the drum unit via the immediate transfer belt, causing banding.
073: [First Transport Motor Feed Speed]
Adjust the first transport motor's speed.
The first transport motor drives the roller in the paper transport path in Tray 1's paper feed unit.
Enter the same values that are specified for 072: [Registration Motor Feed Speed].
Setting Items
[First Transport Motor Feed Speed]
074: [Second Transport Motor Feed Speed]
Adjust the second transport motor's speed.
The second transport motor drives the roller in the paper transport path in Tray 2's paper feed unit.
Enter the same values that are specified for 072: [Registration Motor Feed Speed].
Setting Items
[Second Transport Motor Feed Speed]
075: [Third Transport Motor Feed Speed]
Adjust the third transport motor's speed.
The third transport motor drives the roller in the paper transport path in Tray 3's paper feed unit.
Enter the same values that are specified for 072: [Registration Motor Feed Speed].
Setting Items
[Third Transport Motor Feed Speed]
Max. Value Min. Value
3.0
Max. Value Min. Value
3.0
Max. Value Min. Value
3.0
Max. Value Min. Value
3.0
Step Unit
0.1 %
Step Unit
0.1 %
Step Unit
0.1 %
Step Unit
0.1 %