Ricoh Pro C5200 Series Manual page 32

CIP Training Pro C5200 series
Adjustment Settings for Operators
[Machine: Paper Feed/ Output]
0103: [Registration Gate: Paper Buckle Amount]
Adjust the degree of paper arching at the registration gate.
If the paper arching is too small or too large, the image may be misaligned or the paper may become
skewed.
This setting is only effective for paper of Paper Weight 1 to 4.
When using paper of Paper Weight 5 to 8, the setting specified in [Registration Gate: Paper Buckle
Amount: Thick Paper] takes precedence.
Setting Items
[Tray 1]
[Tray 2]
[Tray 3]
[Tray 4]
[Bypass Tray]
[2 Sided]
[LCT]
0104: [Registration Gate: Paper Buckle Amount: Thick Paper]
Adjust the degree of paper arching at the registration gate when using paper of Paper Weight 5 to 8.
By adjusting the degree of paper arching for relatively stiff thick paper, you can prevent image
misalignment and paper skew.
For paper of Paper Weight 1 to 4, specify [Registration Gate: Paper Buckle Amount].
Default Max.
Value Value
0 5
Min.
Step
Value
1
Unit
mm