Ricoh Pro C5200 Series Manual page 93

CIP Training Pro C5200 series
Adjustment Settings for Operators
No.
005 [Magnification: Across
Feed: Side 1]
006 [Magnification: Across
Feed: Side 2]
007 [Magnification: With Feed:
Side 1]
008 [Magnification: With Feed:
Side 2]
009 [Erase Margin: Leading
Edge]
010 [Erase Margin: Trailing
Edge]
Line Speed Adjustment
For details about the following items, see page 115 "Line Speed Adjustment".
No.
061 [Fusing Belt Feed Speed]
066 [Paper Transfer Belt Feed
Speed]
067 [First Paper Motor Feed
Speed]
068 [Second Paper Motor Feed
Speed]
069 [Third Paper Motor Feed
Speed]
072 [Registration Motor Feed
Speed]
071 [Bypass Tray Motor Feed
Speed]
073 [First Transport Motor Feed
Speed]
Item
Adjust the vertical image scaling on Side 1 of the paper
according to the paper expansion or shrinkage.
Adjust the vertical image scaling on Side 2 of the paper
according to the paper expansion or shrinkage.
Adjust the horizontal image scaling on Side 1 of the
paper according to the paper expansion or shrinkage.
Adjust the horizontal image scaling on Side 2 of the
paper according to the paper expansion or shrinkage.
Adjust the mask width at the leading edge of the image.
Adjust the mask width at the trailing edge of the image.
Item
Adjust the fusing belt's speed.
Adjust the paper transfer belt's speed.
Adjust the first paper feed motor's speed.
Adjust the second paper feed motor's speed.
Adjust the third paper feed motor's speed.
Adjust the registration motor's speed.
Adjust the bypass tray paper feed motor's speed.
Adjust the first transport motor's speed.
Description
Description