Ricoh Pro C5200 Series Manual page 64

CIP Training Pro C5200 series
Adjustment Settings for Operators
[Output Tray Descending Position]
0814: [Exit Guide Close Timing: Booklet Fin]
Specify when to close the exit guide after paper is delivered to the finisher shift tray of Finisher SR5070
or Booklet Finisher SR5080.
The exit guide opens and closes when a deck of stapled paper is delivered.
However, if the guide does not close at the right time, the deck may be bent and not delivered properly.
Select the timing for closing the exit guide according to the paper in use.
[Exit Guide Close Timing: Booklet Fin]
0815: [Output Trail Edge Press Setting]
Specify whether or not to press down the trailing edge of the paper when it is delivered to the finisher
shift tray of Finisher SR5070 or Booklet Finisher SR5080.
Depending on the type of paper, if too many sheets are sent to the shift tray at a time, they may not be
aligned properly.
To reduce variations in paper alignment, set this to [On].
[Output Trail Edge Press Setting]
Setting Items
Setting Items
Setting Items
Values
[Default]
[Lowest]
[Lower]
Values
[Default]
[Delayed]
Values
[Auto]
[On]
[Off]
[Coated Paper: On]
[Large Size (More than
364 mm): On]
Default Value
[Default]
Default Value
[Default]
Default Value
[Auto]