Ricoh Pro C5200 Series Manual page 123

CIP Training Pro C5200 series
Adjustment Settings for Operators
041: [Ppr Trns CV: Start Timing: FC: Side 1]
Adjust the timing to start constant voltage control for the bias on Side 1 during paper transfer when
printing in full color.
Use this to adjust transferability at the leading edge of the paper.
Setting Items
[Ppr Trns CV: Start Timing: FC: Side 1]
042: [Ppr Trns CV: Start Timing: FC: Side 2]
Adjust the timing to start constant voltage control for the bias on Side 2 during paper transfer when
printing in full color.
Use this to adjust transferability at the leading edge of the paper.
Setting Items
[Ppr Trns CV: Start Timing: FC: Side 2]
039: [Ppr Trns CV: Duration: BW: Side 1]
Adjust the duration of constant voltage control for the bias on Side 1 during paper transfer when printing
Use this to adjust transferability at the leading edge of the paper.
• For the bias during paper transfer at the start of printing, the machine performs constant voltage
control and then switches to constant current control. If you set "CV Start Timing" to "50ms" and "CV
Control Duration" to "30ms", constant voltage control for the paper transfer bias starts 50
milliseconds before printing a sheet and lasts for 30 milliseconds,. This is followed by constant
current control for the remaining 20 milliseconds, after which printing starts.
Setting Items
[Ppr Trns CV: Duration: BW: Side 1]
Max. Value Min. Value
100 0
Max. Value Min. Value
100 0
Max. Value Min. Value
100 0
Step Unit
1 ms
Step Unit
1 ms
Step Unit
1 ms