Ricoh Pro C5200 Series Manual page 115

CIP Training Pro C5200 series
Adjustment Settings for Operators
099: [Process Speed Setting]
Adjust the machine's copy/print speed.
Pro C5200S
• [High]
65 cpm (full speed)
• [Middle]
50 cpm
• [Low]
32 cpm
Pro C5210S
• [High]
80 cpm (full speed)
• [Middle]
55.8 cpm
• [Low]
35.7 cpm
• In some cases, if you change this setting from [Low] to [Middle] or from [Middle] to [High], the
toner may not properly fuse to the paper.
• Depending on the type of paper, you can increase the toner gloss by changing this setting from
[High] to [Middle] or from [Middle] to [Low].
[Process Speed Setting]
Toner Adhesion Adjustment
011: [Maximum Image Density: K]
Adjust the intermediate transfer belt toner adhesion for black.
Use this to adjust the density and color of the printed image. Depending on the paper being used, it may
be necessary to make this adjustment to achieve optimal toner adhesion.
Setting Items Values
[Low]
[High]
[Middle]