Ricoh Pro C5200 Series Manual page 28

CIP Training Pro C5200 series
Adjustment Settings for Operators
• Adjusting this setting may cause distorted text and blurred lines. Check the printed images while
making the adjustment.
0205: [Density Difference: Across Feed]
Adjust the image density difference between the top and bottom of the image.
To make the adjusted settings take effect, turn the main power off and then back on.
density at the bottom (and increase it at the top).
Setting Items
[Black]
[Cyan]
[Magenta]
[Yellow]
• Depending on the machine's other settings, this setting may have no effect.
0207: [Fusing Temperature on Standby]
Adjust the set fusing temperature according to the machine status.
To achieve proper fusing when printing, the machine adjusts the temperature of the heating roller
according to the paper type or thickness. You can reduce the wait time during which the machine makes
this adjustment by changing the temperature in effect during standby.
BZS204
Default Max.
Value Value
0 10
Min.
Step
Value
1
Unit
None