Table of Contents
Advertisement
CIP Training Pro C5200 series
Adjustment Settings for Operators
Specify the length of area at the trailing edge of the paper to which the current set in 030: [Paper
Transfer Current: TE: FC] is applied.
Use this to reduce image quality degradation at the trailing edge of the paper.
Setting Items
[Paper Transfer Current: TE Length: FC]
037: [Ppr Trns CV: Start Timing: BW: Side 1]
Adjust the timing to start constant voltage control for the bias on Side 1 during paper transfer when
Use this to adjust transferability at the leading edge of the paper.
• For the bias during paper transfer at the start of printing, the machine performs constant voltage
control and then switches to constant current control. If you set "CV Start Timing" to "50ms" and "CV
Control Duration" to "30ms", constant voltage control for the paper transfer bias starts 50
milliseconds before printing a sheet and lasts for 30 milliseconds,. This is followed by constant
current control for the remaining 20 milliseconds, after which printing starts.
Setting Items
[Ppr Trns CV: Start Timing: BW: Side 1]
038: [Ppr Trns CV: Start Timing: BW: Side 2]
Adjust the timing to start constant voltage control for the bias on Side 2 during paper transfer when
Use this to adjust transferability at the leading edge of the paper.
Setting Items
[Ppr Trns CV: Start Timing: BW: Side 2]
Max. Value
Min. Value
100
0
Max. Value
Min. Value
100
0
Max. Value
Min. Value
100
0
Step
Unit
1
mm
Step
Unit
1
ms
Step
Unit
1
ms
Advertisement
Table of Contents
