Ricoh Pro C5200 Series Manual page 17

CIP Training Pro C5200 series
Adjustment Settings for Operators
No.
0409 [Paper Alignment in Shift
Tray: Across Feed]
0410 [Paper Alignment for
Stapling: Across Feed]
0411 [Paper Alignment for
Booklet: Across Feed]
0412 [Paper Tapping for Extra
Feed for Stapling]
0413 [Claw Shift for Center
Folding]
0801 [Staple Position: Across
Feed 1]
0802 [Staple Position: Across
Feed 2]
0803 [Staple Position: With
Feed]
0804 [Paper Alignment for
Stapling: Across Feed]
Item
Adjust the width of the paper alignment jogger in the shift
tray in order to reduce vertical variation in paper
alignment due to difference in size, thickness, and paper
curl when using Finisher SR4120 or Finisher SR4130.
Adjust the width of the staple jogger for edge stapling in
order to reduce vertical variation in paper alignment due
to difference in size, thickness, and paper curl when
using Finisher SR4120 or Finisher SR4130.
Adjust the width of the staple jogger for booklets in order
to reduce vertical variation in paper alignment due to
difference in size, thickness, and paper curl when using
Finisher SR4130.
Adjust the paper tapping for extra paper feed to the
paper guide for stapling.
Adjust this setting if the paper delivered to the paper
guide for stapling overshoots or stops short of the guide.
Adjust the paper alignment in the paper feed direction
for center folding.
Adjust this setting if the paper alignment in the paper
feed direction is inaccurate because of inconsistent
paper size and paper curling when using certain types of
paper.
Adjust the vertical position of the staple (applied at an
edge) when using Finisher SR5070 or Booklet Finisher
SR5080.
Adjust the vertical position of the staples (dual) when
using Finisher SR5070 or Booklet Finisher SR5080.
Adjust the horizontal position of the staples when using
Finisher SR5070 or Booklet Finisher SR5080.
Adjust the width of the staple jogger for edge stapling
when using Finisher SR5070 or Booklet Finisher
SR5080.
Description