Eclipse 500 System Manual page 62

Section 3. Flight Controls
concentric knobs on the lower portion of the MFD to control trim in each individual
axis. Rotating the outer knob moves a cursor box to the desired axis, while rotating
the inner knob changes the trim setting.
NOTE:
Pressing the ALL INTERRUPT switch on the sidestick for two seconds will cause
the flight controls synoptic to appear to allow switching from NORMAL to
ALTERNATE
ALL INTRP
The ALL INTERRUPT line select key disables all interrupt switch on both sidesticks in
the event that the switch fails in the all interrupt position
The ALL INTRP line select key has two selections
NORMAL
DISABLE
STALL PROT
The stall protection line select key allows enabling and disabling of the stall protection
system and has two selections
ON
OFF
Pressing the stall protection line select key prompts a CONFIRM and CANCEL line
select key to appear. If CONFIRM is pressed, stall protection is turned OFF and a
STALL PROTECTION OFF status message appears.
ECB LINK
The ECB LINK line select key selects the Flight Control Electronic Circuit Breaker
synoptic.
42
Copyright © — Eclipse Aviation Corporation
Eclipse 5OO Systems Manual
Version 2.0 April 2007