Eclipse 500 System Manual page 389

Section 15. Multi Function Display (MFD)
ACKNOWLEDGMENT & RECALL
Acknowledgement
1. Pilot silences aural alert by depressing master warning button on ACP (light
extinguishes).
2. Pilot acknowledges the CAS message by depressing the CAS control knob.
(Advisory messages that do not contain a checklist OR synoptic assist will
move into RECALL bin when acknowledged – see below for description of
recall function).
3. Corrective action checklist is displayed in MFD tile 6, and accompanying
synoptic is placed in MFD tile 7 (if available). Checklist and synoptic displace
previous tile displays.
4. Upon checklist completion (if available) and if the event has been corrected,
the CAS message shall disappear. Checklist and synoptic remain on the
MFD tiles until the pilot selects a different view.
5. Upon checklist completion (if available) and if the event has not been
corrected, the CAS message shall move to the recall bin.
Recall
The recall function provides the ability to recall previous warning, caution and
advisory CAS messages where the condition still exists (those that have not
been "corrected," but where the pilot action has been completed). "RECALL"
appears in uppercase white letters in a fixed position directly above the white
dividing line in the CAS message window. "RECALL" will remain visible until
power is removed from the aircraft. CAS Messages placed in the recall bin are
only stored for the current power cycle. When "RECALL" is selected via the
control knob and acknowledged, recall messages appear above the "RECALL"
label. Messages in the recall bin are grouped chronologically within their
categorizations.
Version 2.0 April 2007
Figure 259. CAS Message Recall
Copyright © — Eclipse Aviation Corporation
Eclipse 5OO Systems Manual
369