Eclipse 500 System Manual page 327

Section 14. Primary Flight Display (PFD)
Marker Beacon Receiver
A marker beacon display appears below the ADI, if an ILS or localizer is selected
as the primary navigation source and/or if an ILS or localizer approach is loaded
in the FMS. When activated, the marker beacon receiver sensitivity is
automatically set to LO, the marker beacon audio is automatically turned on, and
the following signals are detected and displayed:
Outer Marker ........................................................... Blue display labeled "OM."
Middle Marker ......................................................Amber display labeled "MM."
Inner Marker............................................................ White display labeled "IM."
Version 2.0 April 2007
Figure 197. Outer Marker Display on PFD
Figure 198. Middle Marker Display on PFD
Copyright © — Eclipse Aviation Corporation
Eclipse 5OO Systems Manual
307